项目名称： LED投光灯SP2002
LED Spot Light SP2002
申报单位： 上海夏仑光电技术有限公司
综合介绍或申报理由：
1. SP2002投光灯专业的光学设计可实现精准控光，光源采用沉入式放置，同时灯具内置网格式防眩光板，双重防眩设计，排布紧凑，混光均匀。整灯全方位散热，温升符合安规标准。
2. 宽电压供电，电气设计不会有压差造成灯具亮度不一致。
3. 灯具透镜采用4mm超白钢化玻璃，透光率高达92%以上。配合硅胶圈密封，防水结构，抗冲击力强。
4. 灯具底板的侧壁无缝贴合设计，灯具底座与灯体转轴连接，最大可调145°，实现了灯具多种角度可视化调节。灯具独特的隐形装配设计，整灯光滑平整无螺丝，应用安装方便，可轻易安装在不同户外环境。
1. The optical design of SP2002 lamp can be used to control the light accurately. The light source is placed in the sink type. Meanwhile, the light lamp has built-in grid type anti-glare board, double anti-glare design, compact arrangement and uniform light mixing. The whole lamp all-round heat dissipation, the temperature rise conforms to the safety regulation standard.
2.Wide voltage power supply, electrical design will not have pressure difference caused by the luminaire brightness is inconsistent.
3.The luminaire lens is made of 4mm ultra-white toughened glass, and the transmittance is over 92%. With silicone ring sealing, waterproof structure, strong impact resistance.
4.The side wall of lamp floor is jointed seamlessly. The lamp base is connected with the rotating shaft of lamp body and the maximum adjustable is 145 °. The visual adjustment of various angles of lamps and lanterns is realized. Unique invisible assembly design of lamps, smooth, without screws, easy to install and easy to install in different outdoor environments.
主要技术参数：
1. 采用原装进口光源，CREE/OSRAM/Lumiled，光效高，光源寿命长
2. 各种光学透镜可选 如：5°/8°/10°/12°/20°/30°/45°/60°/10*55°/10*22°，满足不同应用场所需求
3. 标准DMX512协议控制 光辉度级别可达65536级可选，实现丰富多彩变化影象
4. 结构防水设计，防护等级可达IP66
5. 供电电压为220AC/24DC可选
1. Using the original imported light source,Cree/OSRAM/Lumiled，
high light efficiency, long life of light source
2. Various optical lenses can be ed such as: 5°/8°/10°/12°/20°/30°/45°/60°/10*55°/10*22°,meet the needs of different application sites
3. The standard DMX512 protocol can control the brightness level up to 65536 levels optional, and realize colorful and varied images.
4. Structural waterproofing design, protection grade up to IP66
5. Supply voltage is optional for 220AC/24DC
与国内外同类产品或同类技术的比较情况：
1. 国内此类灯具设计时灯具造型过于复杂，外观线条不简洁，表面看到安装螺丝居多，灯具不美观，灯具独特的隐形装配设计，整灯光滑平整无螺丝，实现了美观设计与简约实用并存的严苛要求。
2. 国内此类灯具相同功率的灯具体积较大且笨重，体积与建筑不融合。该灯具采用新材料高导电性能的石墨烯材料，充分解决了灯具的散热性能。
3. 国内此类灯具一般只进行二次光学设计，很少进行三次光学设计，该灯具充分考虑灯具结构对光学的影响，采用三次光学设计，使出光更柔和，防眩性能更好。
1. This kind of lamp design in China is too complicated, the appearance line is not simple, the surface sees the installation screw in the majority, the lamp is not beautiful, the unique invisible assembly design of the lamp, the whole lamp is smooth, smooth and without screws, The strict requirements of aesthetic design and simplicity and utility are realized.
2. This kind of lamps and lanterns of the same power in China is large and bulky, and does not merge with buildings. The new material, graphene material with high conductivity, is used to fully solve the heat dissipation property of the lamp.
3. In China, this kind of lamps is only designed by secondary optics, but seldom by cubic optical design. This kind of lamps takes into ac the influence of the structure of lamps and lanterns on optics, and adopts the design of three times optics to make the light softer and the anti-glare performance better.
经济评价分析：
. 灯具的60W 的光通量可以替代传统卤素灯具150W 的光通量，可以节约用户的电费成本。
2. ①采用原装进口高性能LED
②采用恒流驱动设计，保证光源稳定
③采用系统的散热设计
3.底座与灯体转轴连接，带有不锈钢刻度盘，最大可调145°，实现了灯具多种角度可视化调节，可拓展性强。
以上三点充分得证了灯具的稳定性，灯具寿命可达10年以上，减少用户维护成本。
1.The luminous flux of 60 W can replace the 150 W luminous flux of traditional halogen lamp, which can save the cost of electricity.
2. ①Adopt original imported high performance LED
②The design of constant current drive ensures the stability of light source.
③Design of Heat dissipation using system
3. The base is connected with the rotating shaft of the lamp body, with stainless steel dial, the maximum adjustable is 145 °, the visual adjustment of various angles of lamps and lanterns is realized, and the expansibility is strong.
The above three points fully prove the stability of lamps and lanterns, lamp life can reach more than 10 years, reducing user maintenance costs.
技术及工艺创新要点：
1.外观
灯具采用隐形装配设计，整灯光滑平整无螺丝，极简的外形赋予灯体平滑流畅的线条，将形式、功能、材料及技术的美感融为一体，体现了新时代的审美潮流。
2.结构
1） 灯具底座与灯体之间转轴连接并加以不锈钢刻度盘，灯具调节角度更加准确；可实现俯角5度至仰角140度的调节，实现了灯具多种角度可视化调节，可拓展性强。
2） 支架中空设计，减少灯具重量。中空部分兼顾用于穿灯具线缆，对线缆起到隐藏与保护作用。
3）灯具发光芯片采用下沉设计，减少眩光产生；发光面四周增加了黑色吸光罩，既可减少灯具眩光，同时隐藏了灯具驱动模块与控制模块。
3.材料
1）采用4mm超白钢化玻璃，透光率大于92%，实现灯具高光效。配合耐候型硅胶圈密封，实现无灌胶结构防水，抗冲击力强。
2）采用新材料高导电性能的石墨烯，充分解决了灯具的散热性能。
1. Appearance
The lamp adopts invisible assembly design, the whole lamp is smooth and flat without screws, and the extremely simple shape endows the lamp body with smooth and smooth lines. The aesthetic feeling of form, function, material and technology is integrated into one, which reflects the aesthetic trend of the new era.
2. Structure
The main results are as follows:
1)The lamp base is connected with the lamp body and the stainless steel dial is used, the adjustment angle of the lamp is more accurate, the angle of the lamp can be adjusted 5 degrees to the elevation angle of 140 degrees, the visual adjustment of various angles of the lamp is realized, and the expansibility of the lamp is strong.
2) Hollow support design to reduce the weight of lamps and lanterns. The hollow part is used to wear the lamp cable, which can hide and protect the cable.
3) The luminaire chip adopts the sinking design to reduce the glare generation, and the black absorbent cover is added around the luminaire surface, which can reduce the glare of the lamp, and hide the driving module and the control module of the lamp at the same time.
3. Materials
1）Using 4mm super-white toughened glass, the transmittance is greater than 92. The luminaire has high light efficiency. With weatherproof silicone ring seal, the structure is waterproofing and strong impact resistance.
2）The new material, graphene with high conductivity, can fully solve the heat dissipation of lamps and lanterns.
实际运用案例和用户评价意见：
详见附件
See annex for details
获奖、专利情况：
实用新型专利号(Patent number of utility model)：ZL 2016 2 0877960.0；ZL 2017 2 0293321.4;ZL 2017 2 0532794.5
详见附件
See annex for details
申报单位介绍：
SALN品牌成立以来，致力成为建筑照明领域研发、生产、销售、定制化服务于一体的LED照明产品整合服务商。我们不仅为客户提供优质产品，更可为客户定制照明系统解决方案。
我们一贯秉承高品质LED产品及增值服务为企业的核心竞争力，以“做好每一只灯”为其经营理念
SALN品牌成立以来，致力成为建筑照明领域研发、生产、销售、定制化服务于一体的LED照明产品整合服务商。我们不仅为客户提供优质产品，更可为客户定制照明系统解决方案。我们一贯秉承高品质LED产品及增值服务为企业的核心竞争力，以“做好每一只灯”为其经营理念。
SALN品牌核心团队有10年以上的LED照明领域相关经验的积累，在工业设计、灯具结构、电子技术、光学应用、控制软硬件等核心领域的技术突破及经验优势，以确保提供具有高品质、高稳定性的LED产品，帮助客户在市场竞争中获得成功。
同时，我们非常注重品牌市场建设，并坚持聚焦战略，为业主方、设计师、工程商提供前期设计开发、模拟分析、二次深化；中期验证优化、样板确认；后期驻场指导安装调试、节目编排、定期维护等一体化、定制化服务，力求做到照明技术与建筑艺术的完美统一。未来，我将不断完善服务体系，继而提升SALN品牌的综合实力。一直以来，我们深信：SALN愿与合作伙伴一起，开放合作，分享共赢，努力构建一个健康化、智慧化、节能化、艺术化，光的主题。
Since the establishment of the SALN brand, we have been committed to the field of building lighting R & D, production, sales, customized services in one of the LED lighting product integration service provider. We not only provide high-quality products for customers, but also customize lighting system solutions for customers.
We always adhere to high-quality LED products and value-added services as the core competitiveness of the enterprise, "do a good job of each lamp" as its business philosophy.
SALN brand core team has more than 10 years of experience in the field of LED lighting, in industrial design, lighting structure, electronic technology, optical applications, control software and hardware and other core areas of technological breakthrough and experience advantage. To ensure the provision of high-quality, high-stability LED products to help customers succeed in the market competition.
At the same time, we pay great attention to the brand market construction, and adhere to the focus strategy, for owners, designers, engineers to provide pre-design development, simulation analysis, secondary deepening; In the later stage, the installation and debugging, program arrangement, regular maintenance and so on are integrated and customized services are provided to achieve the perfect unity of lighting technology and architectural art. In the future, I will continue to improve the service system, and then enhance the comprehensive strength of the SALN brand. All along, we are convinced that SALN is willing to work with partners to open up and cooperate, share and win, and strive to build a healthy, intelligent, energy-efficient, and art. The theme of light.
产品图片：
粤公网安备 44010602001351号